Nasi wolontariusze nie przetłumaczyli jeszcze tego artykułu na język Polski. Dołącz do nas i pomóż go przetłumaczyć!
Można także przeczytać artykuł w języku: English (US).

The <length> CSS data type represents a distance value. Lengths can be used in numerous CSS properties, such as width, height, margin, padding, border-width, font-size, and text-shadow.

Note: Although <percentage> values are also CSS dimensions, and are usable in some of the same properties that accept <length> values, they are not themselves <length> values.

Syntax

The <length> data type consists of a <number> followed by one of the units listed below. As with all CSS dimensions, there is no space between the unit literal and the number. The length unit is optional after the number 0.

Note: Some properties allow negative <length>s, while others do not.

Units

Relative length units

Relative lengths represent a measurement in terms of some other distance. Depending on the unit, this can be the size of a specific character, the line height, or the size of the viewport.

Font-relative lengths

Font-relative lengths define the <length> value in terms of the size of a particular character or font attribute in the font currently in effect in an element or its parent.

Note: These units, especially em and rem, are often used to create scalable layouts, which maintain the vertical rhythm of the page even when the user changes the font size.

cap
Represents the "cap height" (nominal height of capital letters) of the element’s font.
ch
Represents the width, or more precisely the advance measure, of the glyph "0" (zero, the Unicode character U+0030) in the element's font.
em
Represents the calculated font-size of the element. If used on the font-size property itself, it represents the inherited font-size of the element.
ex
Represents the x-height of the element's font. On fonts with the "x" letter, this is generally the height of lowercase letters in the font; 1ex ≈ 0.5em in many fonts.
ic
Equal to the used advance measure of the "水" (CJK water ideograph, U+6C34) glyph found in the font used to render it.
lh
Equal to the computed value of the line-height property of the element on which it is used, converted to an absolute length.
rem
Represents the font-size of the root element (typically <html>). When used within the root element font-size, it represents its initial value (a common browser default is 16px, but user-defined preferences may modify this).
rlh
Equal to the computed value of the line-height property on the root element (typically <html>), converted to an absolute length. When used on the font-size or line-height properties of the root element, it refers to the properties' initial value.
Viewport-percentage lengths

Viewport-percentage lengths define the <length> value relative to the size of the viewport, i.e., the visible portion of the document. Viewport lengths are invalid in @page declaration blocks.

Note: If the <html> and <body> elements are set as overflow:auto, space taken by scrollbars is not subtracted from the viewport, whereas it will be subtracted if set as overflow:scroll.
vh
Equal to 1% of the height of the viewport's initial containing block.
vw
Equal to 1% of the width of the viewport's initial containing block.
vi
Equal to 1% of the size of the initial containing block, in the direction of the root element’s inline axis.
vb
Equal to 1% of the size of the initial containing block, in the direction of the root element’s block axis.
vmin
Equal to the smaller of vw and vh.
vmax
Equal to the larger of vw and vh.

Absolute length units

Absolute length units represent a physical measurement when the physical properties of the output medium are known, such as for print layout. This is done by anchoring one of the units to a physical unit, and then defining the others relative to it. The anchor is done differently for low-resolution devices, such as screens, versus high-resolution devices, such as printers.

For low-dpi devices, the unit px represents the physical reference pixel; other units are defined relative to it. Thus, 1in is defined as 96px, which equals 72pt. The consequence of this definition is that on such devices, dimensions described in inches (in), centimeters (cm), or millimeters (mm) doesn't necessary match the size of the physical unit with the same name.

For high-dpi devices, inches (in), centimeters (cm), and millimeters (mm) are the same as their physical counterparts. Therefore, the px unit is defined relative to them (1/96 of 1 inch).

Note: Many users increase their user agent's default font size to make text more legible. Absolute lengths can cause accessibility problems, since they are fixed and do not scale according to user settings. For this reason, prefer relative lengths (such as em or rem) when setting font-size.

px
One pixel. For screen displays, it traditionally represents one device pixel (dot). However, for printers and high-resolution screens, one CSS pixel implies multiple device pixels. 1px = 1/96th of 1in.
cm
One centimeter. 1cm = 96px/2.54.
mm
One millimeter. 1mm = 1/10th of 1cm.
Q
One quarter of a millimeter. 1Q = 1/40th of 1cm.
in
One inch. 1in = 2.54cm = 96px.
pc
One pica. 1pc = 12pt = 1/6th of 1in.
pt
One point. 1pt = 1/72nd of 1in.
mozmm , removed in Firefox 59
An experimental unit that attempts to render at exactly one millimeter regardless of the size or resolution of the display. This is rarely actually what you want, but may be useful in particular for mobile devices.

Interpolation

When animated, values of the <length> data type are interpolated as real, floating-point numbers. The interpolation happens on the calculated value. The speed of the interpolation is determined by the timing function associated with the animation.

Specifications

Specification Status Comment
CSS Values and Units Module Level 4
The definition of '<length>' in that specification.
Editor's Draft Adds the vi, vb, ic, lh, and rlh units.
CSS Values and Units Module Level 3
The definition of '<length>' in that specification.
Candidate Recommendation Adds the ch, rem, vw, vh, vmin, vmax, and Q units.
CSS Level 2 (Revision 1)
The definition of '<length>' in that specification.
Recommendation Explicit definition of the pt, pc, and px units.
CSS Level 1
The definition of '<length>' in that specification.
Recommendation Initial definition. Implicit definition of the pt, pc, and px units.

Browser compatibility

 

FeatureChromeEdgeFirefoxInternet ExplorerOperaSafari
Basic support1 Yes133.51
cap unit No No No No No No
ch unit271211 29207
ex unit Yes Yes Yes Yes Yes Yes
ic unit No No No No No No
lh unit No No No No No No
mozmm unit No No4 — 59 No No No
Q unit No No49 No No No
rem unit4123.6911.64.1
rlh unit No Yes No No No No
vb unit No No No No No No
vh unit2012199206
vi unit No No No No No No
vmax unit26 ?19 No20 Yes
vmin unit20 ?19

10

93

20 Yes
vw unit2012199206
Viewport-percentage lengths invalid in @page ? ?21 ? ? ?
1in is always equal to 96px Yes ?4 No No No
FeatureAndroid webviewChrome for AndroidEdge mobileFirefox for AndroidOpera AndroidiOS SafariSamsung Internet
Basic support Yes Yes Yes4 Yes Yes Yes
cap unit No No No No No No No
ch unit Yes Yes124 Yes7.1 Yes
ex unit Yes Yes Yes Yes Yes Yes Yes
ic unit No No No No No No No
lh unit No No No No No No No
mozmm unit No No No ? No No No
Q unit No No No49 No No No
rem unit2.1 Yes124124 Yes
rlh unit No No Yes No No No No
vb unit No No No No No No No
vh unit Yes Yes1219 Yes6 Yes
vi unit No No No No No No No
vmax unit1.5 Yes ?19 No4 Yes
vmin unit Yes Yes ?19 No6 Yes
vw unit Yes Yes1219 Yes6 Yes
Viewport-percentage lengths invalid in @page ? ? ?21 ? ? ?
1in is always equal to 96px ? ? ? ? ? ? ?

1. From Firefox 1 to Firefox 3, ch was the width of the M character.

2. From Firefox 1 to Firefox 3, ch did not work with border-width and outline-width CSS properties.

3. Supported as vm.