background-position

The background-position CSS property sets the initial position for each background image. The position is relative to the position layer set by background-origin.

Try it

Syntax

css
/* Keyword values */
background-position: top;
background-position: bottom;
background-position: left;
background-position: right;
background-position: center;

/* <percentage> values */
background-position: 25% 75%;

/* <length> values */
background-position: 0 0;
background-position: 1cm 2cm;
background-position: 10ch 8em;

/* Multiple images */
background-position:
  0 0,
  center;

/* Edge offsets values */
background-position: bottom 10px right 20px;
background-position: right 3em bottom 10px;
background-position: bottom 10px right;
background-position: top right 10px;

/* Global values */
background-position: inherit;
background-position: initial;
background-position: revert;
background-position: revert-layer;
background-position: unset;

The background-position property is specified as one or more <position> values, separated by commas.

Values

<position>

A <position>. A position defines an x/y coordinate, to place an item relative to the edges of an element's box. It can be defined using one to four values. If two non-keyword values are used, the first value represents the horizontal position and the second represents the vertical position. If only one value is specified, the second value is assumed to be center. If three or four values are used, the length-percentage values are offsets for the preceding keyword value(s).

1-value syntax: The value may be:

  • The keyword value center, which centers the image.
  • One of the keyword values top, left, bottom, or right. This specifies an edge against which to place the item. The other dimension is then set to 50%, so the item is placed in the middle of the edge specified.
  • A <length> or <percentage>. This specifies the X coordinate relative to the left edge, with the Y coordinate set to 50%.

2-value syntax: One value defines X and the other defines Y. Each value may be:

  • One of the keyword values top, left, bottom, or right. If left or right is given, then this defines X and the other given value defines Y. If top or bottom is given, then this defines Y and the other value defines X.
  • A <length> or <percentage>. If the other value is left or right, then this value defines Y, relative to the top edge. If the other value is top or bottom, then this value defines X, relative to the left edge. If both values are <length> or <percentage> values, then the first defines X and the second Y.
  • Note that: If one value is top or bottom, then the other value may not be top or bottom. If one value is left or right, then the other value may not be left or right. This means, e.g., that top top and left right are not valid.
  • Order: When pairing keywords, placement is not important as the browser can reorder it; the values top left and left top will yield the same result. When pairing <length> or <percentage> with a keyword, the placement is important: the value defining X should come first followed by Y, so for example the value right 20px is valid while 20px right is invalid. The values left 20% and 20% bottom are valid as X and Y values are clearly defined and the placement is correct.
  • The default value is left top or 0% 0%.

3-value syntax: Two values are keyword values, and the third is the offset for the preceding value:

  • The first value is one of the keyword values top, left, bottom, right, or center. If left or right are given here, then this defines X. If top or bottom are given, then this defines Y and the other keyword value defines X.
  • The <length> or <percentage> value, if it is the second value, is the offset for the first value. If it is the third value, it is the offset for the second value.
  • The single length or percentage value is an offset for the keyword value that precedes it. The combination of one keyword with two <length> or <percentage> values is not valid.

4-value syntax: The first and third values are keyword values defining X and Y. The second and fourth values are offsets for the preceding X and Y keyword values:

  • The first and third values are equal to one of the keyword values top, left, bottom, or right. If left or right is given for the first value, then this defines X and the other value defines Y. If top or bottom is given for the first value, then this defines Y and the other keyword value defines X.
  • The second and fourth values are <length> or <percentage> values. The second value is the offset for the first keyword. The fourth value is the offset for the second keyword.

Regarding Percentages

The percentage offset of the given background image's position is relative to the container. A value of 0% means that the left (or top) edge of the background image is aligned with the corresponding left (or top) edge of the container, or the 0% mark of the image will be on the 0% mark of the container. A value of 100% means that the right (or bottom) edge of the background image is aligned with the right (or bottom) edge of the container, or the 100% mark of the image will be on the 100% mark of the container. Thus a value of 50% horizontally or vertically centers the background image as the 50% of the image will be at the 50% mark of the container. Similarly, background-position: 25% 75% means the spot on the image that is 25% from the left and 75% from the top will be placed at the spot of the container that is 25% from the container's left and 75% from the container's top.

Essentially what happens is the background image dimension is subtracted from the corresponding container dimension, and then a percentage of the resulting value is used as the direct offset from the left (or top) edge.

(container width - image width) * (position x%) = (x offset value)
(container height - image height) * (position y%) = (y offset value)

Using the X axis for an example, let's say we have an image that is 300px wide and we are using it in a container that is 100px wide, with background-size set to auto:

100px - 300px = -200px (container & image difference)

So that with position percentages of -25%, 0%, 50%, 100%, 125%, we get these image-to-container edge offset values:

-200px * -25% = 50px
-200px * 0% = 0px
-200px * 50% = -100px
-200px * 100% = -200px
-200px * 125% = -250px

So with these resultant values for our example, the left edge of the image is offset from the left edge of the container by:

  • + 50px (putting the left image edge in the center of the 100-pixel-wide container)
  • 0px (left image edge coincident with the left container edge)
  • -100px (left image edge 100px to the left of the container, in this example that means the middle 100px image area is centered in the container)
  • -200px (left image edge 200px to the left of the container, in this example that means the right image edge is coincident with the right container edge)
  • -250px (left image edge 250px to the left of the container, in this example that puts the right edge of the 300px-wide image in the center of the container)

It's worth mentioning that if your background-size is equal to the container size for a given axis, then a percentage position for that axis will have no effect because the "container-image difference" will be zero. You will need to offset using absolute values.

Formal definition

Initial value0% 0%
Applies toall elements. It also applies to ::first-letter and ::first-line.
Inheritedno
Percentagesrefer to the size of the background positioning area minus size of background image; size refers to the width for horizontal offsets and to the height for vertical offsets
Computed valueas each of the properties of the shorthand:
  • background-position-x: A list, each item consisting of: an offset given as a combination of an absolute length and a percentage, plus an origin keyword
  • background-position-y: A list, each item consisting of: an offset given as a combination of an absolute length and a percentage, plus an origin keyword
Animation typea repeatable list

Formal syntax

background-position = 
<bg-position>#

<bg-position> =
[ left | center | right | top | bottom | <length-percentage> ] |
[ left | center | right | <length-percentage> ] [ top | center | bottom | <length-percentage> ] |
[ center | [ left | right ] <length-percentage>? ] && [ center | [ top | bottom ] <length-percentage>? ]

<length-percentage> =
<length> |
<percentage>

Examples

Positioning background images

Each of these three examples uses the background property to create a yellow, rectangular element containing a star image. In each example, the star is in a different position. The third example illustrates how to specify positions for two different background images within one element.

HTML

html
<div class="exampleone">Example One</div>
<div class="exampletwo">Example Two</div>
<div class="examplethree">Example Three</div>

CSS

css
/* Shared among all <div>s */
div {
  background-color: #ffee99;
  background-repeat: no-repeat;
  width: 300px;
  height: 80px;
  margin-bottom: 12px;
}

/* These examples use the `background` shorthand property */
.exampleone {
  background: url("startransparent.gif") #ffee99 2.5cm bottom no-repeat;
}
.exampletwo {
  background: url("startransparent.gif") #ffee99 left 4em bottom 1em no-repeat;
}

/* Multiple background images: Each image is matched with the
   corresponding position, from first specified to last. */
.examplethree {
  background-image: url("startransparent.gif"), url("catfront.png");
  background-position:
    0px 0px,
    right 3em bottom 2em;
}

Result

Specifications

Specification
CSS Backgrounds and Borders Module Level 3
# background-position

Browser compatibility

BCD tables only load in the browser

See also