d

Baseline Widely available

This feature is well established and works across many devices and browser versions. It’s been available across browsers since January 2020.

The d attribute defines a path to be drawn.

A path definition is a list of path commands where each command is composed of a command letter and numbers that represent the command parameters. The commands are detailed below.

This attribute is used with the SVG <path> element.

d is a presentation attribute, and hence can also be used as a CSS property.

Example

html
<svg viewBox="0 0 100 100" xmlns="http://www.w3.org/2000/svg">
  <path
    fill="none"
    stroke="red"
    d="M 10,30
       A 20,20 0,0,1 50,30
       A 20,20 0,0,1 90,30
       Q 90,60 50,90
       Q 10,60 10,30 z" />
</svg>

path

For <path>, d is a string containing a series of path commands that define the path to be drawn.

Value <string>
Default value none
Animatable Yes

Using d as a CSS property

d is a presentation attribute, and hence can be also be modified using CSS. The property takes either path() or none.

The example below shows how you might apply a new path on hover over an element. The new path is the same as the old one, but adds a line across the heart.

css
html,
body,
svg {
  height: 100%;
}

/* This path is displayed on hover*/
#svg_css_ex1:hover path {
  d: path(
    "M10,30 A20,20 0,0,1 50,30 A20,20 0,0,1 90,30 Q90,60 50,90 Q10,60 10,30 z M5,5 L90,90"
  );
}
html
<svg id="svg_css_ex1" viewBox="0 0 100 100" xmlns="http://www.w3.org/2000/svg">
  <path
    fill="none"
    stroke="red"
    d="M 10,30
       A 20,20 0,0,1 50,30
       A 20,20 0,0,1 90,30
       Q 90,60 50,90
       Q 10,60 10,30 z
       " />
</svg>

For a <path> animation example, see the CSS d property reference page example.

Path commands

Path commands are instructions that define a path to be drawn. Each command is composed of a command letter and numbers that represent the command parameters.

SVG defines 6 types of path commands, for a total of 20 commands:

Note: Commands are case-sensitive. An upper-case command specifies absolute coordinates, while a lower-case command specifies coordinates relative to the current position.

It is always possible to specify a negative value as an argument to a command:

  • negative angles will be anti-clockwise;
  • absolute negative x and y values are interpreted as negative coordinates;
  • relative negative x values move to the left, and relative negative y values move upwards.

MoveTo path commands

MoveTo instructions can be thought of as picking up the drawing instrument, and setting it down somewhere else—in other words, moving the current point (Po; {xo, yo}). There is no line drawn between Po and the new current point (Pn; {xn, yn}).

Command Parameters Notes
M (x, y)+

Move the current point to the coordinate x,y. Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit absolute LineTo (L) command(s) (see below).

Formula: Pn = {x, y}
m (dx, dy)+

Move the current point by shifting the last known position of the path by dx along the x-axis and by dy along the y-axis. Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit relative LineTo (l) command(s) (see below).

Formula: Pn = {xo + dx, yo + dy}

Examples

html
<svg viewBox="0 0 100 100" xmlns="http://www.w3.org/2000/svg">
  <path
    fill="none"
    stroke="red"
    d="M 10,10 h 10
       m  0,10 h 10
       m  0,10 h 10
       M 40,20 h 10
       m  0,10 h 10
       m  0,10 h 10
       m  0,10 h 10
       M 50,50 h 10
       m-20,10 h 10
       m-20,10 h 10
       m-20,10 h 10" />
</svg>

LineTo path commands

LineTo instructions draw a straight line from the current point (Po; {xo, yo}) to the end point (Pn; {xn, yn}), based on the parameters specified. The end point (Pn) then becomes the current point for the next command (Po′).

Command Parameters Notes
L (x, y)+

Draw a line from the current point to the end point specified by x,y. Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit absolute LineTo (L) command(s).

Formula: Po′ = Pn = {x, y}

l (dx, dy)+

Draw a line from the current point to the end point, which is the current point shifted by dx along the x-axis and dy along the y-axis. Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit relative LineTo (l) command(s) (see below).

Formula: Po′ = Pn = {xo + dx, yo + dy}

H x+

Draw a horizontal line from the current point to the end point, which is specified by the x parameter and the current point's y coordinate. Any subsequent value(s) are interpreted as parameter(s) for implicit absolute horizontal LineTo (H) command(s).

Formula: Po′ = Pn = {x, yo}

h dx+

Draw a horizontal line from the current point to the end point, which is specified by the current point shifted by dx along the x-axis and the current point's y coordinate. Any subsequent value(s) are interpreted as parameter(s) for implicit relative horizontal LineTo (h) command(s).

Formula: Po′ = Pn = {xo + dx, yo}

V y+

Draw a vertical line from the current point to the end point, which is specified by the y parameter and the current point's x coordinate. Any subsequent values are interpreted as parameters for implicit absolute vertical LineTo (V) command(s).

Formula: Po′ = Pn = {xo, y}

v dy+

Draw a vertical line from the current point to the end point, which is specified by the current point shifted by dy along the y-axis and the current point's x coordinate. Any subsequent value(s) are interpreted as parameter(s) for implicit relative vertical LineTo (v) command(s).

Formula: Po′ = Pn = {xo, yo + dy}

Examples

html
<svg viewBox="0 0 200 100" xmlns="http://www.w3.org/2000/svg">
  <!-- LineTo commands with absolute coordinates -->
  <path
    fill="none"
    stroke="red"
    d="M 10,10
           L 90,90
           V 10
           H 50" />

  <!-- LineTo commands with relative coordinates -->
  <path
    fill="none"
    stroke="red"
    d="M 110,10
           l 80,80
           v -80
           h -40" />
</svg>

Cubic Bézier curve

Cubic Bézier curves are smooth curve definitions using four points:

starting point (current point)

(Po = {xo, yo})

end point

(Pn = {xn, yn})

start control point

(Pcs = {xcs, ycs}) (controls curvature near the start of the curve)

end control point

(Pce = {xce, yce}) (controls curvature near the end of the curve)

After drawing, the end point (Pn) becomes the current point for the next command (Po′).

Command Parameters Notes
C (x1,y1, x2,y2, x,y)+

Draw a cubic Bézier curve from the current point to the end point specified by x,y. The start control point is specified by x1,y1 and the end control point is specified by x2,y2. Any subsequent triplet(s) of coordinate pairs are interpreted as parameter(s) for implicit absolute cubic Bézier curve (C) command(s).

Formulae:
Po′ = Pn = {x, y} ;
Pcs = {x1, y1} ;
Pce = {x2, y2}
c (dx1,dy1, dx2,dy2, dx,dy)+

Draw a cubic Bézier curve from the current point to the end point, which is the current point shifted by dx along the x-axis and dy along the y-axis. The start control point is the current point (starting point of the curve) shifted by dx1 along the x-axis and dy1 along the y-axis. The end control point is the current point (starting point of the curve) shifted by dx2 along the x-axis and dy2 along the y-axis. Any subsequent triplet(s) of coordinate pairs are interpreted as parameter(s) for implicit relative cubic Bézier curve (c) command(s).

Formulae:
Po′ = Pn = {xo + dx, yo + dy} ;
Pcs = {xo + dx1, yo + dy1} ;
Pce = {xo + dx2, yo + dy2}
S (x2,y2, x,y)+ Draw a smooth cubic Bézier curve from the current point to the end point specified by x,y. The end control point is specified by x2,y2. The start control point is the reflection of the end control point of the previous curve command about the current point. If the previous command wasn't a cubic Bézier curve, the start control point is the same as the curve starting point (current point). Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit absolute smooth cubic Bézier curve (S) commands.
s (dx2,dy2, dx,dy)+ Draw a smooth cubic Bézier curve from the current point to the end point, which is the current point shifted by dx along the x-axis and dy along the y-axis. The end control point is the current point (starting point of the curve) shifted by dx2 along the x-axis and dy2 along the y-axis. The start control point is the reflection of the end control point of the previous curve command about the current point. If the previous command wasn't a cubic Bézier curve, the start control point is the same as the curve starting point (current point). Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit relative smooth cubic Bézier curve (s) commands.

Examples

html
<svg
  viewBox="0 0 200 100"
  xmlns="http://www.w3.org/2000/svg"
  xmlns:xlink="http://www.w3.org/1999/xlink">
  <!-- Cubic Bézier curve with absolute coordinates -->
  <path
    fill="none"
    stroke="red"
    d="M 10,90
           C 30,90 25,10 50,10
           S 70,90 90,90" />

  <!-- Cubic Bézier curve with relative coordinates -->
  <path
    fill="none"
    stroke="red"
    d="M 110,90
           c 20,0 15,-80 40,-80
           s 20,80 40,80" />

  <!-- Highlight the curve vertex and control points -->
  <g id="ControlPoints">
    <!-- First cubic command control points -->
    <line x1="10" y1="90" x2="30" y2="90" stroke="lightgrey" />
    <circle cx="30" cy="90" r="1.5" />

    <line x1="50" y1="10" x2="25" y2="10" stroke="lightgrey" />
    <circle cx="25" cy="10" r="1.5" />

    <!-- Second smooth command control points (the first one is implicit) -->
    <line
      x1="50"
      y1="10"
      x2="75"
      y2="10"
      stroke="lightgrey"
      stroke-dasharray="2" />
    <circle cx="75" cy="10" r="1.5" fill="lightgrey" />

    <line x1="90" y1="90" x2="70" y2="90" stroke="lightgrey" />
    <circle cx="70" cy="90" r="1.5" />

    <!-- curve vertex points -->
    <circle cx="10" cy="90" r="1.5" />
    <circle cx="50" cy="10" r="1.5" />
    <circle cx="90" cy="90" r="1.5" />
  </g>
  <use href="#ControlPoints" x="100" />
</svg>

Quadratic Bézier curve

Quadratic Bézier curves are smooth curve definitions using three points:

starting point (current point)

Po = {xo, yo}

end point

Pn = {xn, yn}

control point

Pc = {xc, yc} (controls curvature)

After drawing, the end point (Pn) becomes the current point for the next command (Po′).

Command Parameters Notes
Q (x1,y1, x,y)+

Draw a quadratic Bézier curve from the current point to the end point specified by x,y. The control point is specified by x1,y1. Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit absolute quadratic Bézier curve (Q) command(s).

Formulae:
Po′ = Pn = {x, y} ;
Pc = {x1, y1}
q (dx1,dy1, dx,dy)+

Draw a quadratic Bézier curve from the current point to the end point, which is the current point shifted by dx along the x-axis and dy along the y-axis. The control point is the current point (starting point of the curve) shifted by dx1 along the x-axis and dy1 along the y-axis. Any subsequent pair(s) of coordinate pairs are interpreted as parameter(s) for implicit relative quadratic Bézier curve (q) command(s).

Formulae:
Po′ = Pn = {xo + dx, yo + dy} ;
Pc = {xo + dx1, yo + dy1}
T (x,y)+

Draw a smooth quadratic Bézier curve from the current point to the end point specified by x,y. The control point is the reflection of the control point of the previous curve command about the current point. If the previous command wasn't a quadratic Bézier curve, the control point is the same as the curve starting point (current point). Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit absolute smooth quadratic Bézier curve (T) command(s).

Formula:
Po′ = Pn = {x, y}
t (dx,dy)+

Draw a smooth quadratic Bézier curve from the current point to the end point, which is the current point shifted by dx along the x-axis and dy along the y-axis. The control point is the reflection of the control point of the previous curve command about the current point. If the previous command wasn't a quadratic Bézier curve, the control point is the same as the curve starting point (current point). Any subsequent coordinate pair(s) are interpreted as parameter(s) for implicit relative smooth quadratic Bézier curve (t) command(s).

Formulae:
Po′ = Pn = {xo + dx, yo + dy}

Examples

html
<svg
  viewBox="0 0 200 100"
  xmlns="http://www.w3.org/2000/svg"
  xmlns:xlink="http://www.w3.org/1999/xlink">
  <!-- Quadratic Bézier curve with implicit repetition -->
  <path
    fill="none"
    stroke="red"
    d="M 10,50
           Q 25,25 40,50
           t 30,0 30,0 30,0 30,0 30,0" />

  <!-- Highlight the curve vertex and control points -->
  <g>
    <polyline
      points="10,50 25,25 40,50"
      stroke="rgb(0 0 0 / 20%)"
      fill="none" />
    <circle cx="25" cy="25" r="1.5" />

    <!-- Curve vertex points -->
    <circle cx="10" cy="50" r="1.5" />
    <circle cx="40" cy="50" r="1.5" />

    <g id="SmoothQuadraticDown">
      <polyline
        points="40,50 55,75 70,50"
        stroke="rgb(0 0 0 / 20%)"
        stroke-dasharray="2"
        fill="none" />
      <circle cx="55" cy="75" r="1.5" fill="lightgrey" />
      <circle cx="70" cy="50" r="1.5" />
    </g>

    <g id="SmoothQuadraticUp">
      <polyline
        points="70,50 85,25 100,50"
        stroke="rgb(0 0 0 / 20%)"
        stroke-dasharray="2"
        fill="none" />
      <circle cx="85" cy="25" r="1.5" fill="lightgrey" />
      <circle cx="100" cy="50" r="1.5" />
    </g>

    <use href="#SmoothQuadraticDown" x="60" />
    <use href="#SmoothQuadraticUp" x="60" />
    <use href="#SmoothQuadraticDown" x="120" />
  </g>
</svg>

Elliptical arc curve

Elliptical arc curves are curves defined as a portion of an ellipse. It is sometimes easier to draw highly regular curves with an elliptical arc than with a Bézier curve.

Command Parameters Notes
A (rx ry angle large-arc-flag sweep-flag x y)+

Draw an Arc curve from the current point to the coordinate x,y. The center of the ellipse used to draw the arc is determined automatically based on the other parameters of the command:

  • rx and ry are the two radii of the ellipse;
  • angle represents a rotation (in degrees) of the ellipse relative to the x-axis;
  • large-arc-flag and sweep-flag allows to chose which arc must be drawn as 4 possible arcs can be drawn out of the other parameters.
    • large-arc-flag allows to chose one of the large arc (1) or small arc (0),
    • sweep-flag allows to chose one of the clockwise turning arc (1) or counterclockwise turning arc (0)
The coordinate x,y becomes the new current point for the next command. All subsequent sets of parameters are considered implicit absolute arc curve (A) commands.
a (rx ry angle large-arc-flag sweep-flag dx dy)+

Draw an Arc curve from the current point to a point for which coordinates are those of the current point shifted by dx along the x-axis and dy along the y-axis. The center of the ellipse used to draw the arc is determined automatically based on the other parameters of the command:

  • rx and ry are the two radii of the ellipse;
  • angle represents a rotation (in degrees) of the ellipse relative to the x-axis;
  • large-arc-flag and sweep-flag allows to chose which arc must be drawn as 4 possible arcs can be drawn out of the other parameters.
    • large-arc-flag allows a choice of large arc (1) or small arc (0),
    • sweep-flag allows a choice of a clockwise arc (1) or counterclockwise arc (0)
The current point gets its X and Y coordinates shifted by dx and dy for the next command. All subsequent sets of parameters are considered implicit relative arc curve (a) commands.

Examples

html
<svg viewBox="0 0 20 20" xmlns="http://www.w3.org/2000/svg">
  <!-- The influence of the arc flags with which the arc is drawn -->
  <path
    fill="none"
    stroke="red"
    d="M 6,10
           A 6 4 10 1 0 14,10" />

  <path
    fill="none"
    stroke="lime"
    d="M 6,10
           A 6 4 10 1 1 14,10" />

  <path
    fill="none"
    stroke="purple"
    d="M 6,10
           A 6 4 10 0 1 14,10" />

  <path
    fill="none"
    stroke="pink"
    d="M 6,10
           A 6 4 10 0 0 14,10" />
</svg>

ClosePath

ClosePath instructions draw a straight line from the current position to the first point in the path.

Command Parameters Notes
Z, z Close the current subpath by connecting the last point of the path with its initial point. If the two points are at different coordinates, a straight line is drawn between those two points.

Note: The appearance of a shape closed with ClosePath may be different to that of one closed by drawing a line to the origin, using one of the other commands, because the line ends are joined together (according to the stroke-linejoin setting), rather than just being placed at the same coordinates.

Examples

html
<svg viewBox="0 -1 30 11" xmlns="http://www.w3.org/2000/svg">
  <!--
  An open shape with the last point of
  the path different to the first one
  -->
  <path
    stroke="red"
    d="M 5,1
           l -4,8 8,0" />

  <!--
  An open shape with the last point of
  the path matching the first one
  -->
  <path
    stroke="red"
    d="M 15,1
           l -4,8 8,0 -4,-8" />

  <!--
  A closed shape with the last point of
  the path different to the first one
  -->
  <path
    stroke="red"
    d="M 25,1
           l -4,8 8,0
           z" />
</svg>

Specifications

Specification
Scalable Vector Graphics (SVG) 2
# DProperty
Scalable Vector Graphics (SVG) 1.1 (Second Edition)
# GlyphElementDAttribute
Scalable Vector Graphics (SVG) 1.1 (Second Edition)
# DAttribute

Browser compatibility

BCD tables only load in the browser

See also

  • SVG <path> element
  • CSS d property