mozilla
Ihre Suchergebnisse

    Manipulieren des Browser-Verlaufes

    Das DOM window Objekt beinhaltet Zugriffsmöglichkeiten auf den Browser-Verlauf über das history Objekt. Es bietet nützliche Methoden und Einstellungen, welche es ermöglichen, den Zurück- und Vorwärts-Button und den Browser-Verlauf zu steuern und - gestartet mit HTML5 - den Verlauf zu manipulieren

    Durch den Verlauf reisen

    Im Verlauf vor und zurück zu gehen ist möglich mit den den Methoden back(), forward() und go().

    Moving forward and backward

    To move backward through history, just do:

    window.history.back();
    

    This will act exactly like the user clicked on the Back button in their browser toolbar.

    Similarly, you can move forward (as if the user clicked the Forward button), like this:

    window.history.forward();
    

    Moving to a specific point in history

    You can use the go() method to load a specific page from session history, identified by its relative position to the current page (with the current page being, of course, relative index 0).

    To move back one page (the equivalent of calling back()):

    window.history.go(-1);
    

    To move forward a page, just like calling forward():

    window.history.go(1);
    

    Similarly, you can move forward 2 pages by passing 2, and so forth.

    You can determine the number of pages in the history stack by looking at the value of the length property:

    var numberOfEntries = window.history.length;
    
    Note: Internet Explorer supports passing string URLs as a parameter to go(); this is non-standard and not supported by Gecko.

    Adding and modifying history entries

    HTML5 introduced the history.pushState() and history.replaceState() methods, which allow you to add and modify history entries, respectively. These methods work in conjunction with the window.onpopstate event.

    Using history.pushState() changes the referrer that gets used in the HTTP header for XMLHttpRequest objects created after you change the state. The referrer will be the URL of the document whose window is this at the time of creation of the XMLHttpRequest object.

    Example

    Suppose http://mozilla.org/foo.html executes the following JavaScript:

    var stateObj = { foo: "bar" };
    history.pushState(stateObj, "page 2", "bar.html");
    

    This will cause the URL bar to display http://mozilla.org/bar.html, but won't cause the browser to load bar.html or even check that bar.html exists.

    Suppose now that the user now navigates to http://google.com, then clicks back. At this point, the URL bar will display http://mozilla.org/bar.html, and the page will get a popstate event whose state object contains a copy of stateObj. The page itself will look like foo.html, although the page might modify its contents during the popstate event.

    If we click back again, the URL will change to http://mozilla.org/foo.html, and the document will get another popstate event, this time with a null state object. Here too, going back doesn't change the document's contents from what they were in the previous step, although the document might update its contents manually upon receiving the popstate event.

    The pushState() method

    pushState() takes three parameters: a state object, a title (which is currently ignored), and (optionally) a URL. Let's examine each of these three parameters in more detail:

    • state object — The state object is a JavaScript object which is associated with the new history entry created by pushState(). Whenever the user navigates to the new state, a popstate event is fired, and the state property of the event contains a copy of the history entry's state object.

      The state object can be anything that can be serialized. Because Firefox saves state objects to the user's disk so they can be restored after the user restarts her browser, we impose a size limit of 640k characters on the serialized representation of a state object. If you pass a state object whose serialized representation is larger than this to pushState(), the method will throw an exception. If you need more space than this, you're encouraged to use sessionStorage and/or localStorage.

    • title — Firefox currently ignores this parameter, although it may use it in the future. Passing the empty string here should be safe against future changes to the method. Alternatively, you could pass a short title for the state to which you're moving.

    • URL — The new history entry's URL is given by this parameter. Note that the browser won't attempt to load this URL after a call to pushState(), but it might attempt to load the URL later, for instance after the user restarts her browser. The new URL does not need to be absolute; if it's relative, it's resolved relative to the current URL. The new URL must be of the same origin as the current URL; otherwise, pushState() will throw an exception. This parameter is optional; if it isn't specified, it's set to the document's current URL.

    Note: In Gecko 2.0 (Firefox 4 / Thunderbird 3.3 / SeaMonkey 2.1) through Gecko 5.0 (Firefox 5.0 / Thunderbird 5.0 / SeaMonkey 2.2), the passed object is serialized using JSON. Starting in Gecko 6.0 (Firefox 6.0 / Thunderbird 6.0 / SeaMonkey 2.3), the object is serialized using the structured clone algorithm. This allows a wider variety of objects to be safely passed.

    In a sense, calling pushState() is similar to setting window.location = "#foo", in that both will also create and activate another history entry associated with the current document. But pushState() has a few advantages:

    • The new URL can be any URL in the same origin as the current URL. In contrast, setting window.location keeps you at the same document only if you modify only the hash.
    • You don't have to change the URL if you don't want to. In contrast, setting window.location = "#foo"; only creates a new history entry if the current hash isn't #foo.
    • You can associate arbitrary data with your new history entry. With the hash-based approach, you need to encode all of the relevant data into a short string.

    Note that pushState() never causes a hashchange event to be fired, even if the new URL differs from the old URL only in its hash.

    The replaceState() method

    history.replaceState() operates exactly like history.pushState() except that replaceState() modifies the current history entry instead of creating a new one.

    replaceState() is particularly useful when you want to update the state object or URL of the current history entry in response to some user action.

    Note: In Gecko 2.0 (Firefox 4 / Thunderbird 3.3 / SeaMonkey 2.1) through Gecko 5.0 (Firefox 5.0 / Thunderbird 5.0 / SeaMonkey 2.2), the passed object is serialized using JSON. Starting in Gecko 6.0 (Firefox 6.0 / Thunderbird 6.0 / SeaMonkey 2.3), the object is serialized using the structured clone algorithm. This allows a wider variety of objects to be safely passed.

    The popstate event

    A popstate event is dispatched to the window every time the active history entry changes. If the history entry being activated was created by a call to pushState or affected by a call to replaceState, the popstate event's state property contains a copy of the history entry's state object.

    See window.onpopstate for sample usage.

    Reading the current state

    When your page loads, it might have a non-null state object.  This can happen, for example, if the page sets a state object (using pushState() or replaceState()) and then the user restarts her browser.  When your page reloads, the page will receive an onload event, but no popstate event.  However, if you read the history.state property, you'll get back the state object you would have gotten if a popstate had fired.

    You can read the state of the current history entry without waiting for a popstate event using the history.state property like this:

    var currentState = history.state;
    

    Examples

    For a complete example of AJAX web site, please see: Ajax navigation example.

    Browser compatibility

    Feature Chrome Firefox (Gecko) Internet Explorer Opera Safari
    replaceState, pushState 5 4.0 (2.0) 10 11.50 5.0
    history.state 18 4.0 (2.0) 10 11.50 6.0
    Feature Android Firefox Mobile (Gecko) IE Mobile Opera Mobile Safari Mobile
    replaceState, pushState ? ? ? ? ?
    history.state ? ? ? ? ?

    See also

    Schlagwörter des Dokuments und Mitwirkende

    Mitwirkende an dieser Seite: christian314159, darksider3
    Zuletzt aktualisiert von: christian314159,