mozilla
Your Search Results

    window.setTimeout

    Rezumat

    Apelează o funcție sau execută un fragment de cod după o durată specificată.

    Sintaxă

    var timeoutID = window.setTimeout(func, delay, [param1, param2, ...]);
    var timeoutID = window.setTimeout(code, delay);
    

    unde

    • timeoutID este ID-ul numeric al funcției, care poate fi folosit mai târziu cu window.clearTimeout().
    • func este funcția pe care vreți să o executați dupa delay milisecunde.
    • code în sintaxa alternativă, este un fragment de cod pe care vreți să-l executați dupa delay milisecunde (nu este recomandat să se folsească sintaxa aceasta, din aceleași motive pentru folosirea eval())
    • delay este numărul de milisecunde (mii ale unei secunde) la care apelul funcției trebuie executat. Durata poate fi mai lungă, vezi Notes mai jos.

    Note that passing additional parameters to the function in the first syntax does not work in Internet Explorer. If you want to enable this functionality on that browser you must use a compatibility code (see the Callback arguments paragraph).

    Important: Prior to Gecko 13 (Firefox 13.0 / Thunderbird 13.0 / SeaMonkey 2.10), Gecko passed an extra parameter to the callback routine, indicating the "actual lateness" of the timeout in milliseconds. This non-standard parameter is no longer passed.

    Example

    The following example sets up two simple buttons in a web page and hooks them to the setTimeout and clearTimeout routines. Pressing the first button will set a timeout which calls an alert dialog after 2 seconds and stores the timeout id for use by clearTimeout. You may optionally cancel this timeout by pressing on the second button.

    HTML Content

    <p>Live Example</p>
    <button onclick="delayedAlert();">Show an alert box after 2 seconds</button>
    <p></p>
    <button onclick="clearAlert();">Cancel alert before it happens</button>
    

    JavaScript Content

    var timeoutID;
    
    function delayedAlert() {
      timeoutID = window.setTimeout(slowAlert, 2000);
    }
    
    function slowAlert() {
      alert("That was really slow!");
    }
    
    function clearAlert() {
      window.clearTimeout(timeoutID);
    }
    

    See also clearTimeout() example.

    Callback arguments

    If you need to pass an argument to your callback function, but need it to work in Internet Explorer, which doesn't support sending additional parameters (neither with setTimeout() or setInterval()) you can include this IE-specific compatibility code which will enable the HTML5 standard parameters passage functionality in that browser for both timers just by inserting it at the beginning of your scripts.

    /*\
    |*|
    |*|  IE-specific polyfill which enables the passage of arbitrary arguments to the
    |*|  callback functions of javascript timers (HTML5 standard syntax).
    |*|
    |*|  https://developer.mozilla.org/en-US/docs/DOM/window.setInterval
    |*|
    |*|  Syntax:
    |*|  var timeoutID = window.setTimeout(func, delay, [param1, param2, ...]);
    |*|  var timeoutID = window.setTimeout(code, delay);
    |*|  var intervalID = window.setInterval(func, delay[, param1, param2, ...]);
    |*|  var intervalID = window.setInterval(code, delay);
    |*|
    \*/
    
    if (document.all && !window.setTimeout.isPolyfill) {
      var __nativeST__ = window.setTimeout;
      window.setTimeout = function (vCallback, nDelay /*, argumentToPass1, argumentToPass2, etc. */) {
        var aArgs = Array.prototype.slice.call(arguments, 2);
        return __nativeST__(vCallback instanceof Function ? function () {
          vCallback.apply(null, aArgs);
        } : vCallback, nDelay);
      };
      window.setTimeout.isPolyfill = true;
    }
    
    if (document.all && !window.setInterval.isPolyfill) {
      var __nativeSI__ = window.setInterval;
      window.setInterval = function (vCallback, nDelay /*, argumentToPass1, argumentToPass2, etc. */) {
        var aArgs = Array.prototype.slice.call(arguments, 2);
        return __nativeSI__(vCallback instanceof Function ? function () {
          vCallback.apply(null, aArgs);
        } : vCallback, nDelay);
      };
      window.setInterval.isPolyfill = true;
    }
    

    Another possibility is to use an anonymous function to call your callback, but this solution is a bit more expensive. Example:

    var intervalID = setTimeout(function() { myFunc("one", "two", "three"); }, 1000);
    

    Yet another possibility is to use function's bind. Example:

    setTimeout(function(arg1){}.bind(undefined, 10));
    

    The "this" problem

    When you pass a method to setTimeout() (or any other function, for that matter), it will be invoked with a wrong this value. This problem is explained in detail in the JavaScript reference.

    Explanation

    Code executed by setTimeout() is run in a separate execution context to the function from which it was called. As a consequence, the this keyword for the called function will be set to the window (or global) object, it will not be the same as the this value for the function that called setTimeout. See the following example:

    myArray = ["zero", "one", "two"];
    myArray.myMethod = function (sProperty) {
        alert(arguments.length > 0 ? this[sProperty] : this);
    };
    
    myArray.myMethod(); // prints "zero,one,two"
    myArray.myMethod(1); // prints "one"
    setTimeout(myArray.myMethod, 1000); // prints "[object Window]" after 1 second
    setTimeout(myArray.myMethod, 1500, "1"); // prints "undefined" after 1,5 seconds
    // let's try to pass the 'this' object
    setTimeout.call(myArray, myArray.myMethod, 2000); // error: "NS_ERROR_XPC_BAD_OP_ON_WN_PROTO: Illegal operation on WrappedNative prototype object"
    setTimeout.call(myArray, myArray.myMethod, 2500, 2); // same error

    As you can see there are no ways to pass the this object to the callback function.

    A possible solution

    A possible way to solve the "this" problem is to replace the two native setTimeout() or setInterval() global functions with two non-native ones which will enable their invocation through the Function.prototype.call method. The following example shows a possible replacement:

    // Enable the passage of the 'this' object through the JavaScript timers
     
    var __nativeST__ = window.setTimeout, __nativeSI__ = window.setInterval;
     
    window.setTimeout = function (vCallback, nDelay /*, argumentToPass1, argumentToPass2, etc. */) {
      var oThis = this, aArgs = Array.prototype.slice.call(arguments, 2);
      return __nativeST__(vCallback instanceof Function ? function () {
        vCallback.apply(oThis, aArgs);
      } : vCallback, nDelay);
    };
     
    window.setInterval = function (vCallback, nDelay /*, argumentToPass1, argumentToPass2, etc. */) {
      var oThis = this, aArgs = Array.prototype.slice.call(arguments, 2);
      return __nativeSI__(vCallback instanceof Function ? function () {
        vCallback.apply(oThis, aArgs);
      } : vCallback, nDelay);
    };
    Note: This two replacements will also enable the HTML5 standard passage of arbitrary arguments to the callback functions of timers in IE. So they can be used as polyfills also. See the Callback arguments paragraph.

    New feature test:

    myArray = ["zero", "one", "two"];
    myArray.myMethod = function (sProperty) {
        alert(arguments.length > 0 ? this[sProperty] : this);
    };
    
    setTimeout(alert, 1500, "Hello world!"); // the standard use of setTimeout and setInterval is preserved, but...
    setTimeout.call(myArray, myArray.myMethod, 2000); // prints "zero,one,two" after 2 seconds
    setTimeout.call(myArray, myArray.myMethod, 2500, 2); // prints "two" after 2,5 seconds
    

    There are not native solutions ad hoc to this problem.

    Note: JavaScript 1.8.5 introduces the Function.prototype.bind() method, which lets you specify the value that should be used as this for all calls to a given function. This lets you easily bypass problems where it's unclear what this will be, depending on the context from which your function was called.

    Notes

    You can cancel the timeout using window.clearTimeout(). If you wish to have your function called repeatedly (i.e. every N milliseconds), consider using window.setInterval().

    It's important to note that if the function or code snippet cannot be executed until the thread that called setTimeout() has terminated.

    Passing string literals

    Passing a string instead of a function to setTimeout() suffers from the same hazards as using eval.

    // Correct
    window.setTimeout(function() {
        alert("Hello World!");
    }, 500);
    
    // Incorrect
    window.setTimeout("alert(\"Hello World!\");", 500);
    
    

    String literals are evaluated in the global context, so local symbols in the context where setTimeout() was called will not be available when the string is evaluated as code.

    Minimum/ maximum delay and timeout nesting

    Historically browsers implement setTimeout() "clamping": successive setTimeout() calls with delay smaller than the "minimum delay" limit are forced to use at least the minimum delay. The minimum delay, DOM_MIN_TIMEOUT_VALUE, is 4 ms (stored in a preference in Firefox: dom.min_timeout_value), with a DOM_CLAMP_TIMEOUT_NESTING_LEVEL of 5ms.

    In fact, 4ms is specified by the HTML5 spec and is consistent across browsers released in 2010 and onward. Prior to (Firefox 5.0 / Thunderbird 5.0 / SeaMonkey 2.2), the minimum timeout value for nested timeouts was 10 ms.

    In addition to "clamping", the timeout can also fire later when the page (or the OS/browser itself) is busy with other tasks.

    To implement a 0 ms timeout in a modern browser you can use window.postMessage() as described here.

    Browsers including Internet Explorer, Chrome, Safari and Firefox store the delay as a 32-bit signed Integer internally. This causes an Integer overflow when using delays larger than 2147483647, resulting in the timeout being executed immediately.

    Inactive tabs

    In (Firefox 5.0 / Thunderbird 5.0 / SeaMonkey 2.2) and Chrome 11, timeouts are clamped to firing no more often than once per second (1000ms) in inactive tabs; see bug 633421 for more information about this in Mozilla or crbug.com/66078 for details about this in Chrome.

    Browser compatibility

    Feature Chrome Firefox (Gecko) Internet Explorer Opera Safari
    Basic support 1.0 1.0 (1.7 or earlier) 4.0 4.0 1.0
    Supports parameters for callback*1 (Yes) (Yes) 10.0 (Yes) ?
    Feature Android Chrome for Android Firefox Mobile (Gecko) IE Mobile Opera Mobile Safari Mobile
    Basic support 1.0 1.0 1.0 (1) 6.0 6.0 1.0
    Supports parameters for callback*1 ? ? ? ? ? ?

    *1 Whether it supports the optional parameters when in its first form or not.

    Specification

    Part of DOM level 0, as specified in HTML5.

    See also

    Document Tags and Contributors

    Contributors to this page: khalid32, Andrew_Pham
    Last updated by: khalid32,
    Hide Sidebar