Nossos voluntários ainda não traduziram este artigo para o Português (do Brasil). Junte-se a nós e ajude-nos a fazer o trabalho!
Você também pode ler o artigo em English (US).

Introduction

This guide explains the basics of interacting with SpiderMonkey's GC as a SpiderMonkey API user.  Since SpiderMonkey has a moving GC, it is very important that it knows about each and every pointer to a GC thing in the system.  SpiderMonkey's rooting API tries to make this task as simple as possible.

What is a GC thing pointer?

"GC thing" is the term used to refer to memory allocated and managed by the SpiderMonkey garbage collector.  The main types of GC thing pointer are:

  • JS::Value
  • JSObject*
  • JSString*
  • JSScript*
  • jsid

Note that JS::Value and jsid can contain pointers internally even though they are not a normal pointer type, hence their inclusion in this list.

If you use these types directly, or create classes, structs or arrays that contain them, you must follow the rules set out in this guide.  If you do not your program will not work correctly - if it works at all.

GC things on the stack

JS::Rooted<T>

All GC thing pointers stored on the stack (i.e., local variables and parameters to functions) must use the JS::Rooted<T> class.  This is a template class where the template parameter is the type of the GC thing it contains.  From the user perspective, a JS::Rooted<T> instance behaves exactly as if it were the underlying pointer.

JS::Rooted must be constructed with a JSContext*, and optionally an initial value.

There are typedefs available for the main types. Within SpiderMonkey, it is suggested that these are used in preference to the template class (Gecko uses the template versions):

Template class Typedef
JS::Rooted<JS::Value> JS::RootedValue
JS::Rooted<JSObject*> JS::RootedObject
JS::Rooted<JSString*> JS::RootedString
JS::Rooted<JSScript*> JS::RootedScript
JS::Rooted<jsid> JS::RootedId

For example, instead of this:

JSObject* localObj = JS_GetObjectOfSomeSort(cx);

You would write this:

JS::RootedObject localObj(cx, JS_GetObjectOfSomeSort(cx));

SpiderMonkey makes it easy to remember to use JS::Rooted<T> types instead of a raw pointer because all of the API methods that may GC take a JS::Handle<T>, as described below, and JS::Rooted<T> autoconverts to JS::Handle<T> but a bare pointer does not.

JS::Handle<T>

All GC thing pointers that are parameters to a function must be wrapped in JS::Handle<T>. A JS::Handle<T> is a reference to a JS::Rooted<T>, and is created implicitly by referencing a JS::Rooted<T>: It is not valid to create a JS::Handle<T> manually (the whole point of a Handle is that it only reference pointers that the GC knows about so it can update them when they move). Like JS::Rooted<T>, a JS::Handle<T> can be used as if it were the underlying pointer.

Since only a JS::Rooted<T> will cast to a JS::Handle<T>, the compiler will enforce correct rooting of any parameters passed to a function that may trigger GC. JS::Handle<T> exists because creating and destroying a JS::Rooted<T> is not free (though it only costs a few cycles). Thus, it makes more sense to only root the GC thing once and reuse it through an indirect reference. Like a reference, a JS::Handle is immutable: it can only ever refer to the JS::Rooted<T> that it was created for.

Similarly to JS::Rooted<T>, there are typedefs available for the main types:

Template class Typedef
JS::Handle<JS::Value> JS::HandleValue
JS::Handle<JSObject*> JS::HandleObject
JS::Handle<JSString*> JS::HandleString
JS::Handle<JSScript*> JS::HandleScript
JS::Handle<jsid> JS::HandleId

You should use JS::Handle<T> for all function parameters taking GC thing pointers (except out-parameters, which are described below).  For example, instead of:

JSObject *
someFunction(JSContext *cx, JSObject* obj) {
    // ...
}

You should write:

JSObject *
someFunction(JSContext *cx, JS::HandleObject obj) {
    // ...
}

JS::MutableHandle<T>

All GC thing pointers that are used as out-parameters must be wrapped in a JS::MutableHandle<T>. A JS::MutableHandle<T> is a reference to a JS::Rooted<T> that, unlike a normal handle, may modify the underlying JS::Rooted<T>. All JS::MutableHandle<T>s are created through an explicit "&" - address of operator - on a JS::Rooted<T> instance. JS::MutableHandle<T> is exactly like a JS::Handle<T> except that it adds a .set(T &t) method and must be created from a JS::Rooted<T> explicitly.

There are typedefs for JS::MutableHandle<T>, the same as for the other templates:

Template class Typedef
JS::MutableHandle<JS::Value> JS::MutableHandleValue
JS::MutableHandle<JSObject*> JS::MutableHandleObject
JS::MutableHandle<JSString*> JS::MutableHandleString
JS::MutableHandle<JSScript*> JS::MutableHandleScript
JS::MutableHandle<jsid> JS::MutableHandleId

JS::MutableHandle<T> should be used for all out-parameters, for example instead of:

bool
maybeGetValue(JSContext *cx, JS::Value* valueOut) {
    // ...
    if (!wasError)
        *valueOut = resultValue;
    return wasError;
}

void
otherFunction(JSContext *cx) {
    JS::Value value;
    bool success = maybeGetValue(cx, &value);
    // ...
}

You should write:

bool
maybeGetValue(JSContext *cx, JS::MutableHandleValue valueOut) {
    // ...
    if (!wasError)
        valueOut.set(resultValue);
    return wasError;
}

void
otherFunction(JSContext *cx) {
    JS::RootedValue value(cx);
    bool success = maybeGetValue(cx, &value);
    // ...
}

Return values

It's ok to return raw pointers!  These do not need to be wrapped in any of rooting classes, but they should be immediately used to initialize a JS::Rooted<T> if there is any code that could GC before the end of the containing function; a raw pointer must never be stored on the stack during a GC.

One rare but especially tricky case to watch out for is where an RAII destructor could GC in a function that is returning a bare pointer. Consider:

JSObject*
someFunction(JSContext* cx) {
    JS::Rooted<JSObject*> obj(cx, foo());
    EventLogger logger(cx);
    ...code...
    return obj;
}

Say that ~EventLogger constructs some sort of object in its destructor, which could trigger a GC. What will happen is that the return statement will pull the bare JSObject* out of the rooted obj variable and either put it in the stack or store it in the return value register. Then ~EventLogger will fire and trigger a GC, invalidating that unrooted stack/register pointer. This scenario is rare but very difficult to notice manually, and will probably be caught by the static rooting hazard analysis. There are two different approaches to resolving this; use whichever better fits your situation:

void
someFunction(JSContext* cx, JS::MutableHandleObject obj) {
    EventLogger(cx);
    ...code...
    obj.set(foo());
}

(note that the above should probably check the return value and propagate an error on null), or:

JSObject*
someFunction(JSContext* cx) {
    JS::Rooted<JSObject*> obj(cx, foo());
    { // Make a scope to force the destructor to run before obj is unwrapped.
        EventLogger(cx);
        ...code...
    }
    return obj;
}

AutoRooters

GC thing pointers that appear as part of a stack-allocated aggregates (array, structure, class, union) should use JS::Rooted<T> when possible.

There are some situations when using JS::Rooted<T> is not possible, or is undesirable for performance reasons.  To cover these cases, there are various AutoRooter classes that can be used.

Here are the main AutoRooters defined:

Type AutoRooter class
JS::Value[] AutoArrayRooter
js::Vector<JS::Value> AutoValueVector
js::Vector<jsid> AutoIdVector
js::Vector<JSObject*> AutoObjectVector
js::Vector<JSScript*> AutoScriptVector

If your case is not covered by one of these, it is possible to write your own by deriving from JS::CustomAutoRooter and overriding the virtual trace() method.  The implementation should trace all the GC things contained in the object by calling JS::TraceEdge.

GC things on the heap

JS::Heap<T>

GC thing pointers on the heap must be wrapped in a JS::Heap<T>. The only exception to this is if they are added as roots with the JS::PersistentRooted class, but don't do this unless it's really necessary.  JS::Heap<T> pointers must also continue to be traced in the normal way, which is covered below.

JS::Heap<T> doesn't require a JSContext*, and can be constructed with or without an initial value parameter.  Like the other template classes, it functions as if it were the GC thing pointer itself.

One consequence of having different rooting requirements for heap and stack data is that a single structure containing GC thing pointers cannot be used on both the stack and the heap.  In this case, separate structures must be created for the stack and the heap.

There are currently no convenience typedefs for JS::Heap<T>.

For example, instead of this:

struct HeapStruct
{
    JSObject*  mSomeObject;
    JS::Value  mSomeValue;
};

You should write:

struct HeapStruct
{
    JS::Heap<JSObject*>  mSomeObject;
    JS::Heap<JS::Value>  mSomeValue;  
};

Tracing

js::NativeObject

All GC pointers stored on the heap must be traced. For regular js::NativeObjects, this is normally done by storing them in slots, which are automatically traced by the GC.

Other JSObjects

When defining a JSObject subclass that contains Heap<T> fields, set the trace hook to invoke a function that traces those fields.

General Classes/Structures

For a regular struct or class, tracing must be triggered manually. The usual way is to define a void trace(JSTracer* trc, const char* name) method on the class -- which is already enough be able to create a JS::Rooted<YourStruct> on the stack -- and then arrange for it to be called during tracing. If a pointer to your structure is stored in the private field of a JSObject, the usual way would be to define a trace hook on the JSObject (see above) that casts the private pointer to your structure and invokes trace() on it:

class MyObject : public JSObject {
{
    ...
    static void trace(JSTracer* trc, JSObject* obj) {
        MyClass* mine = static_cast<MyClass*>(obj->getPrivate());
        mine->trace(trc, "MyClass private field");
    }
}

class MyClass {
    Heap<JSString*> str;
  public:
    void trace(JSTracer* trc, const char* name) {
        JS::TraceEdge(trc, &str, "my string");
    }
}

If a pointer to your structure is stored in some other structure, then its trace() method should invoke yours:

struct MyOwningStruct {
    MyClass* mything;
    void trace(JSTracer* trc, const char* name) {
        if (mything)
            mything->trace(trc, "my thing");
    }
}

If the toplevel structure is not stored in a JSObject, then how it gets traced depends on why it should be alive. The simplest approach is to use JS::PersistentRooted (usable on anything with a trace method with the appropriate signature):

JS::PersistentRooted<MyOwningStruct> immortalStruct;

But note that JS::PersistentRooted in a struct or class is a rather dangerous thing to use -- it will keep a GC thing alive, and most GC things end up keeping their global alive, so if your class/struct is reachable in any way from that global, then nothing will ever be cleaned up by the GC.

 

Summary

  • Use JS::Rooted<T> typedefs for local variables on the stack.
  • Use JS::Handle<T> typedefs for function parameters.
  • Use JS::MutableHandle<T> typedefs for function out-parameters.
  • Use an implicit cast from JS::Rooted<T> to get a JS::Handle<T>.
  • Use an explicit address-of-operator on JS::Rooted<T> to get a JS::MutableHandle<T>.
  • Return raw pointers from functions.
  • Use JS::Rooted<T> fields when possible for aggregates, otherwise use an AutoRooter.
  • Use JS::Heap<T> members for heap data. Note: Heap<T> are not "rooted": they must be traced!
  • Do not use JS::Rooted<T>, JS::Handle<T> or JS::MutableHandle<T> on the heap.
  • Do not use JS::Rooted<T> for function parameters.
  • Use JS::PersistentRooted<T> for things that are alive until the process exits (or until you manually delete the PersistentRooted for a reason not based on GC finalization.)

Etiquetas do documento e colaboradores

Etiquetas: 
Colaboradores desta página: sphink, fscholz, terrence, tp21sQkv, jonco, sfink
Última atualização por: sphink,