mozilla
Os seus resultados da pesquisa

    Writing efficient CSS

    Este documento fornece orientações para otimizar o código CSS, e mais especificamente sobre como escrever seletores eficientes.

    A especificação CSS não especifica como os navegadores devem implementar o sistema de estilo, apenas o que ele deve fazer. Devido a isso, os motores de sistema diferentes de estilo podem ter comportamentos de desempenho completamente diferentes e, especialmente, Gecko e WebKit, que são de código aberto, implementar algoritmos similares, com pontos fortes e fracos muito semelhantes. Portanto, as dicas apresentadas aqui devem ser úteis para documentos do mundo real web.

    A primeira seção é uma discussão geral de como o sistema habitual estilo categoriza regras. As seções a seguir contêm as diretrizes para escrever regras que se aproveitam de tal implementação do sistema de um estilo.

    Como o sistema de estilo quebra regras

    O sistema de estilo quebra as regras em quatro categorias principais:

    1. Regra de ID
    2. Regra da Classe
    3. Regra de Tag
    4. Regras Universais

    É fundamental compreender estas categorias, como são os blocos de construção fundamentais da regra correspondência.

    Eu uso o termo chave seletora nos parágrafos que se seguem. A chave seletora de é a última parte do selector (a parte que corresponde ao elemento a ser acompanhada, em vez de os seus antepassados).

    Por exemplo, em regra...

    a img, div > p, h1 + [title] {…}
    

    ... os seletores chave são img, p, e title.

    Regra ID

    A primeira categoria é constituída por aqueles que possuem uma regra ID seletor como o seu selector de chave.

    Example
    button#backButton {…} /* This is an ID-categorized rule */
    #urlBar[type="autocomplete"] {…} /* This is an ID-categorized rule */
    treeitem > treerow > treecell#myCell:active {…} /* This is an ID-categorized rule */
    

    Class rules

    If a rule has a class specified as its key selector, then it falls into this category.

    Example
    button.toolbarButton {…} /* A class-based rule */
    .fancyText {…}	/* A class-based rule */
    menuitem > .menu-left[checked="true"] {…} /* A class-based rule */
    

    Tag rules

    If no class or ID is specified as the key selector, the next candidate is the tag category. If a rule has a tag specified as its key selector, then the rule falls into this category.

    Example
    td {…} /* A tag-based rule */
    treeitem > treerow {…} /* A tag-based rule */
    input[type="checkbox"] {…} /* A tag-based rule */
    

    Universal rules

    All other rules fall into this category.

    Example
    [hidden="true"] {…} /* A universal rule */  
    * {…}		/* A universal rule */
    tree > [collapsed="true"] {…} /* A universal rule */
    

    How the style system matches rules

    The style system matches rules by starting with the key selector, then moving to the left (looking for any ancestors in the rule’s selector). As long as the selector’s subtree continues to check out, the style system continues moving to the left until it either matches the rule, or abandons because of a mismatch.

    The most fundamental concept to learn is this rule filtering. The categories exist in order to filter out irrelevant rules (so the style system doesn’t waste time trying to match them).

    This is the key to dramatically increasing performance. The fewer rules required to check for a given element, the faster style resolution will be.

    For example, if an element has an ID, then only ID rules that match the element’s ID will be checked. Only Class Rules for a class found on the element will be checked. Only Tag Rules that match the tag will be checked. Universal Rules will always be checked.

    Guidelines for efficient CSS

    Avoid universal rules

    Make sure a rule doesn’t end up in the universal category!

    Don’t qualify ID rules with tag names or classes

    If a rule has an ID selector as its key selector, don’t add the tag name to the rule. Since IDs are unique, adding a tag name would slow down the matching process needlessly.

    BAD
    button#backButton {…}
    BAD
    .menu-left#newMenuIcon {…}
    GOOD
    #backButton {…}
    GOOD
    #newMenuIcon {…}
    Exception: When it’s desirable to change the class of an element dynamically in order to apply different styles in different situations, but the same class is going to be shared with other elements.

    Don’t qualify class rules with tag names

    The previous concept also applies here.  Though classes can be used many times on the same page, they are still more unique than a tag.

    One convention you can use is to include the tag name in the class name.  However, this may cost some flexibility; if design changes are made to the tag, the class names must be changed as well.  (It’s best to choose strictly semantic names, as such flexibility is one of the aims of separate stylesheets.)

    BAD
    treecell.indented {…}
    GOOD
    .treecell-indented {…}
    BEST
    .hierarchy-deep {…}

    Use the most specific category possible

    The single biggest cause of slowdown is too many rules in the tag category. By adding classes to our elements, we can further subdivide these rules into Class Categories, which eliminates time spent trying to match rules for a given tag.

    BAD
    treeitem[mailfolder="true"] > treerow > treecell {…}
    GOOD
    .treecell-mailfolder {…}

    Avoid the descendant selector

    The descendant selector is the most expensive selector in CSS. It is dreadfully expensive—especially if the selector is in the Tag or Universal Category.

    Frequently, what is really desired is the child selector.  For instance, the performances are so bad, that descendant selectors are banned in Firefox' User Interface CSS, without a specific justification. It's a good idea to do the same on your Web pages

    BAD
    treehead treerow treecell {…}
    BETTER, BUT STILL BAD (see next guideline)
    treehead > treerow > treecell {…}

    Tag category rules should never contain a child selector

    Avoid using the child selector with tag category rules. This will dramatically lengthen the match time (especially if the rule is likely to be matched) for all occurrences of that element.

    BAD
    treehead > treerow > treecell {…}
    GOOD
    .treecell-header {…}

    Question all usages of the child selector

    Exercise caution when using the child selector. Avoid it if you can.

    In particular, the child selector is frequently used with RDF trees and menus like so:

    BAD
    treeitem[IsImapServer="true"] > treerow > .tree-folderpane-icon {…}

    Remember that REF attributes can be duplicated in a template! Take advantage of this.  Duplicate RDF properties on child XUL elements in order to change them based on the attribute.

    GOOD
    .tree-folderpane-icon[IsImapServer="true"] {…}

    Rely on inheritance

    Learn which properties inherit, and allow them to do so!  

    For example, XUL widgets are explicitly set up such that a parent’s list-style-image or font rules will filter down to anonymous content. It’s not necessary to waste time on rules that talk directly to anonymous content.

    BAD
    #bookmarkMenuItem > .menu-left { list-style-image: url(blah) }
    GOOD
    #bookmarkMenuItem { list-style-image: url(blah) }

    In the above example, the desire to style anonymous content (without leveraging the inheritance of list-style-image) resulted in a rule that was in the Class Category, when the rule should have ended up in the ID Category—the most specific category of all!

    Remember: Elements all have the same classes—especially anonymous content!

    The above “bad” rule forces every menu’s icons to be tested for containment within the bookmarks menu item. Since there are many menus, this is extraordinarily expensive.  Instead, the “good” rule limits the testing to the bookmarks menu.

    Use -moz-image-region!

    Putting a bunch of images into a single image file and selecting them with -moz-image-region performs significantly better than putting each image into its own file.

    Use scoped stylesheets

    If you specify a stylesheet as an XBL resource, the styles only apply to the bound elements and their anonymous content. This reduces the inefficiency of universal rules and child selectors because there are fewer elements to consider.

    Original Document Information

    Etiquetas do documento e colaboradores

    Contribuíram para esta página: Danty
    Última atualização por: Danty,