mozilla
검색 결과

    Building PyXPCOM

     

    These are the instructions for building PyXPCOM.

    Installing Python

    PyXPCOM Requirements

    • PyXPCOM requires Python 2.3 or later (Python 2.3 and 2.4 have both been recently tested).
    • PyXPCOM requires access to a shared Python library.

    Linux

    For Linux users, the build script should check if you have a suitable shared library version of Python. Jump to Compiling Mozilla, and if you receive an error telling you a shared Python can not be located, then you'll need to compile Python with --enable-shared as outlined below.

    Recent Fedora and Ubuntu builds

    These distributions generally have a shared Python already available.

    Gentoo systems

    Building a shared Python library seems to only be possible with python-2.3* or later, so you'll need to upgrade if you're using python-2.2* or earlier. For ebuilds python-2.3* and later the shared library is built and installed by default.

    FreeBSD

    Python built from ports (lang/python24) already provides a shared Python library.

    Mac OS X

    For OS X 10.3 and 10.4 users, the Python 2.3 Framework is already available. If you want to build against Python 2.4, you will need to build your own from source, build via DarwinPorts or Fink, or install either MacPython or ActivePython. You can then skip to Compiling Mozilla. If you want to distribute your application, you might prefer to use the built-in Python 2.3 Framework at first, since embedding the Python Framework into an application bundle may take some non-standard customizations to the Python build scripts.

    Windows

    The official Python installer for Windows installs the shared version of the the library automatically, so Windows users can simply install Python and skip to Compiling Mozilla.

    Other systems

    If you don't use any of the above systems, get the latest stable Python source tarball from python.org and do:

    tar xjf Python-2.4.2.tar.bz2
    cd Python-2.4.2
    ./configure --enable-shared --prefix=/usr  # Adjust --prefix to install over your current Python
    make
    sudo make install
    

    Compiling Mozilla

    You should be familiar with the Developer Documentation regarding downloading the source code and building applications in the Mozilla code base (eg. Firefox, XulRunner).

    Depending on your needs, you will want to pick an appropriate branch of the Mozilla CVS repository.

    • If you need the most stable code base, and only need Python in backend XPCOM classes, check out Mozilla from the MOZILLA_1_8_BRANCH or the MOZILLA_1_8_0_BRANCH in CVS and build it. Note that this branch may **not** automatically check if you have a suitable shared Python build on Linux systems - you must ensure this yourself.
    • Use the Mozilla trunk. This has the latest version of XPCOM, incorporating work done on the DOM branches (see below)

    You can build PyXPCOM against any of the applications available in the CVS repository. The example below shows building PyXPCOM for SeaMonkey, with Python DOM support. You can also build against XULRunner on the HEAD or MOZILLA_1_8_0_BRANCH by removing "python/dom" from the options and changing the branch in the CVS checkout command.

    All Platforms

    On all platforms, you should first ensure you can build a vanilla Mozilla without any Python extensions. If you can't build Mozilla without Python, you certainly will not be able to build it with Python :)

    Once you have a successful build, simply enable the extension python (if you are using the 1.8 branch, you must specify python/xpcom). Once this extension has been enabled, rebuild Mozilla.

    For example, 1.8 branch users could add a line:

    
     
    ac_add_options --enable-extensions=python/xpcom,default

    Or later versions can add:

    
     
    ac_add_options --enable-extensions=python,default

    to your .mozconfig file.

    Nominating the Python version

    The configure script will attempt to locate a Python version to use. In most cases, all you need to do is ensure the Python version you wish to use is on your PATH before configuring Mozilla.

    Alternatively, you can also set a PYTHON environment variable that points to a Python executable (not a directory - it must be a Python executable). If set, the configure script will use the Python pointed to by the variable.

    You can confirm what Python is being used by carefully watching the configure process. You should see a message similar to:

    Building PyXPCOM using Python-2.4 from c:/Python24
    

    Windows/MSVC users: make sure you don't use cygwin's Python. It is likely to cause compilation errors later.

    Linux and OS X

    There are no special considerations for Linux. Below is an example build session on Linux, building the trunk.

    
     
    cvs -d :pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot co mozilla/client.mk
    cd mozilla
    cat > ~/.mozconfig << "EOF"
    mk_add_options MOZ_CO_PROJECT=suite
    ac_add_options --enable-application=suite
    ac_add_options --enable-default-toolkit=gtk2
    ac_add_options --enable-xft
    ac_add_options --enable-extensions=python,default
    ac_add_options --disable-optimize
    ac_add_options --enable-debug
    mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/suite-debug
    EOF
    make -f client.mk checkout
    make -f client.mk build

    Windows

    There are no special build considerations for Windows. Follow the generic instructions above regarding --enable-extensions in your .mozconfig file.

    Note that you'll get build problems if you try to make a debug build of Mozilla using the release version of Python. Building in this configuration is still possible, but not without certain workarounds (one of which is commenting out #define Py_DEBUG in <tt>pyconfig.h</tt>).

    Testing PyXPCOM

    First test your fresh PyXPCOM build from within Mozilla's runtime environment.

    Linux and OS X:

    
     
    cd suite-debug/dist/bin
    export PYTHONPATH=$PYTHONPATH:$HOME/mozilla/suite-debug/dist/bin/python # Adjust this to your PyXPCOM build path
    ./run-mozilla.sh ./seamonkey -chrome chrome://pyxultest/content

    Windows:

    
     
    cd dist\bin
    set PYTHONPATH=%PYTHONPATH%;C:\mozilla\dist\bin\python
    seamonkey.exe -chrome chrome://pyxultest/content

    A window with controls should pop up. Run the tests it contains.

    In the same directory you can also perform a simple test of the Python xpcom module from a standalone Python environment.

    Linux and OS X:

    
     
    export MOZILLA_FIVE_HOME=$HOME/mozilla/suite-debug/dist/bin # Adjust this to your Mozilla build path
    export LD_LIBRARY_PATH=$MOZILLA_FIVE_HOME
    python -c 'from xpcom import components; print components.classes["@mozilla.org/file/local;1"]'

    Windows:

    
     
    set PATH=%PATH%;C:\mozilla\dist\bin
    set MOZILLA_FIVE_HOME=C:\mozilla\dist\bin
    set LD_LIBRARY_PATH=%MOZILLA_FIVE_HOME%
    python -c "from xpcom import components; print components.classes['@mozilla.org/file/local;1']"

    You should see output similar to the following:

    Type Manifest File: /home/you/mozilla/suite-debug/dist/bin/components/xpti.dat
    <xpcom.components._Class instance at 0xb7c1be8c>
    nsStringStats
     => mAllocCount:            431
     => mReallocCount:          270
     => mFreeCount:             423  --  LEAKED 8 !!!
     => mShareCount:            450
     => mAdoptCount:              0
     => mAdoptFreeCount:          0
    

    If you see Python error messages instead, make sure $PYTHONPATH is still set the same as in the first test.

    문서 태그 및 공헌자

    Contributors to this page: 아샬, teoli
    최종 변경: teoli,