SpiderMonkey のビルド

この翻訳は不完全です。英語から この記事を翻訳 してください。


この文書は SpiderMonkey の最新版をソースコードからビルドする方法を解説します。

ビルドを始める前に、必要なツールがインストールされていることを確認してください。Linux, Windows, Mac, その他の環境 での準備は、それぞれのドキュメントをごらんください。28 より古いバージョンのビルドをする際は、NSPR が追加で必要となります。

また SpiderMonkey 最新版のソースコード も必要です。


SpiderMonkey をただインストールする場合、もしくはライブラリとして使用する場合はこの手順に従ってビルドしてください。SpiderMonkey 自身の開発をされる場合は、以下で説明される開発者向け / デバッグ向けビルドを行ってください。

cd js/src

# This name should end with "_OPT.OBJ" to make the version control system ignore it.
mkdir build_OPT.OBJ
cd build_OPT.OBJ
# Use "mozmake" on Windows

ビルドには autoconf 2.13 が必要です。2.13 より新しい場合は、動作しません。Windows ではMozillaBuild パッケージに autoconf 2.13 が含まれています。

付記:Mac で以下のようなエラーが発生する場合

"checking whether the C compiler (gcc-4.2  ) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.


CC=clang CXX=clang++  ../configure

この手順でビルドした場合、build-release/dist/binjs という名前で実行ファイルが作成されます。dist/bin/js --help と help オプションをつけて実行しヘルプを表示させることで、動作確認を行えます。以降の操作に関しては JavaScript シェルの紹介 を参照してください。

Mac、Linux、そしてその他の UNIX では、 make install を実行することで、ファイルをシステムにインストールできます。シェアードライブラリは /usr/local/lib に、C のヘッダファイルは/usr/local/include に、実行ファイルは /usr/local/bin へそれぞれインストールされます。


SpiderMonkey 自身の開発やデバッグを目的とする場合、日々のデバッグにはデバッグビルドを、パフォーマンステストには最適化ビルドを、それぞれ別のディレクトリで行うことになります。デバッグビルドを行うには、上記の手順に加えて以下の 3 ステップを行います:

cd js/src

# This name should end with "_DBG.OBJ" to make the version control system ignore it.
mkdir build_DBG.OBJ
cd build_DBG.OBJ
../configure --enable-debug --disable-optimize
# Use "mozmake" on Windows

JS_GC_ZEAL オプションをつけてビルドすると、zealous ガベージコレクションが有効になります。これはメモリリークに代表されるメモリ関連のデバッグを行う時に有用です。詳細は JS_SetGCZeal() をご覧ください。


../configure --help

Windows Builds

Since version 28, threadsafe builds are the default, and should work out of the box on all POSIX platforms. Hence, the following instructions should only be relevant if you're on Windows or compiling an older version of SpiderMonkey.

The MozillaBuild batch file you used to open your shell (e.g. start-shell-msvc2013.bat or start-shell-msvc2013-x64.bat) determines whether the compiler toolchain will target 32-bit or 64-bit builds. To create a 64-bit build, note that you must configure with --target=x86_64-pc-mingw32 --host=x86_64-pc-mingw32.

Since the POSIX NSPR emulation is not available for Windows, a working version of NSPR must be available to your build. The easiest option is to configure with --enable-nspr-build. This configure option builds the in-tree version of NSPR which is probably what you want; because SpiderMonkey uses newer NSPR symbols, the NSPR that ships with your operating system probably does not work.

If --enable-nspr-build does not work, explicitly tell configure where to find NSPR using the --with-nspr-cflags and --with-nspr-libs configure options. For example, assuming your local NSPR has been installed to C:/mozilla-build/msys/local:

./configure --with-nspr-cflags="-IC:/mozilla-build/msys/local/include" \
            --with-nspr-libs="C:/mozilla-build/msys/local/lib/libnspr4.a \
                              C:/mozilla-build/msys/local/lib/libplds4.a \

If you get symbol loading or dynamic library errors, you can force the correct NSPR to load with:

PATH="$PATH;C:/mozilla-build/msys/local/lib/" ./js

Specifying installation directories

make install puts files in the following directories by default. You can override this by passing options to the configure script:

What it is Where it gets put configure option
executables, shell scripts /usr/local/bin --bindir
libraries, data /usr/local/lib --libdir
architecture-independent data /usr/local/share --sharedir
C header files /usr/local/include --includedir

For convenience, you can pass the configure script an option of the form --prefix=<PREFIXDIR>, which substitutes <PREFIXDIR> for /usr/local in all the settings above, in one step. This is usually the least troublesome thing to do, as it preserves the typical arrangement of lib, bin, and the rest.

Note: All directories you pass to configure are recorded in the generated makefile, so you don't need to specify them again until you re-run configure.

Building SpiderMonkey as a static library

By default, SpiderMonkey builds as a shared library. However, you can build SpiderMonkey as a static library by specifying the --disable-shared-js flag when you run configure.

Specifying compilers and compiler flags

If you want to use a compiler other than the one the configure script chooses for you by default, you can set the CXX variable in the environment when you run configure. This will save the values you specify in the generated makefile, so once you've set it, you don't need to do so again until you re-run configure.

If you'd like to pass certain flags to the compiler, you can set the CXXFLAGS environment variable when you run configure. For example, if you're using the GNU toolchain, the following will pass the -g3 flag to the compiler, causing it to emit debug information about macros. Then you can use those macros in gdb commands:

$ CXXFLAGS=-g3 $SRC/configure
checking whether the C++ compiler (c++ -g3 ) works... yes

To build a 32-bit version on a 64-bit Linux system, you can use the following:

PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig CC="gcc -m32" CXX="g++ -m32" AR=ar $SRC/configure --target=i686-pc-linux

To build a 64-bit version on a 32-bit Mac system (e.g. Mac OS X 10.5), you can use the following:

AR=ar CC="gcc -m64" CXX="g++ -m64" ../configure --target=x86_64-apple-darwin10.0.0

To build a 64-bit Windows version, you can use the following:

$SRC/configure --host=x86_64-pc-mingw32 --target=x86_64-pc-mingw32
Note: You must have started your MozillaBuild shell with the proper -x64.bat script in order for the 64-bit compilers to be in your PATH.

Whatever compiler and flags you pass to configure are recorded in the generated makefile, so you don't need to specify them again until you re-run configure.

Building your application

While "How to build your complete application" is clearly out of scope for this document, here are some tips that will help get you on your way:

  • The SpiderMonkey developers frequently and deliberately change the JSAPI ABI. You cannot use headers built for one version/configuration of JSAPI to create object files which will be linked against another.
  • Support for JS_THREADSAFE was recently removed, and threadsafe builds are now enabled by default.
  • The js-config script, described below, is the recommended way to determine correct include paths, required libraries, etc. for your embedding to use during compilation. We highly recommend calling the js-config script from your embedding's makefile to set your CFLAGS, LDFLAGS, and so forth.
  • To install SpiderMonkey somewhere other than the default, you must use the configure --prefix option, as described above. Failure to do so may break your js-config.h header or js-config script.
  • Some features detected by the configure script do not work for cross-compilation.

Using the js-config script

In addition to the SpiderMonkey libraries, header files, and shell, the SpiderMonkey build also produces a shell script named js-config which other build systems can use to find out how to compile code using the SpiderMonkey APIs, and how to link with the SpiderMonkey libraries.

Note: In SpiderMonkey 1.8.5, the js-config script is not generated properly on many platforms. If the instructions below do not work, you can try this workaround.

When invoked with the --cflags option, js-config prints the flags that you should pass to the C compiler when compiling files that use the SpiderMonkey API. These flags ensure the compiler will find the SpiderMonkey header files.

$ ./js-config --cflags # Example output: -I/usr/local/include/js -I/usr/include/nspr

When invoked with the --libs option, js-config prints the flags that you should pass to the C compiler when linking an executable or shared library that uses SpiderMonkey. These flags ensure the compiler will find the SpiderMonkey libraries, along with any libraries that SpiderMonkey itself depends upon (like NSPR).

$ ./js-config --libs # Example output: -L/usr/local/lib -lmozjs -L/usr/lib -lplds4 -lplc4 -lnspr4 -lpthread -ldl -ldl -lm  -lm -ldl

Testing SpiderMonkey

  • Run ${BUILDDIR}/dist/bin/js Y.js and check if appropriate output is printed. (It should say: 5! is 120.)

  • Run the main test suite by running ./tests/jstests.py ${BUILDDIR}/dist/bin/js

  • Run JIT-specific tests by running: ./jit-test/jit_test.py ${BUILDDIR}/dist/bin/js

Building SpiderMonkey 1.8 or earlier

Use these instructions to build SpiderMonkey from an official source release or from the old CVS repository. To build the latest SpiderMonkey sources from Mercurial, see Building SpiderMonkey above.

SpiderMonkey is easy to build from source if you have the usual Mozilla build prerequisites installed. Before you begin, make sure you have right build tools for your computer: LinuxWindowsMacothers.

First, download a SpiderMonkey source distribution, such as SpiderMonkey 1.8 Release Candidate 1.

To build, use these commands:

tar xvzf js-1.8.0-rc1.tar.gz
cd js/src
make -f Makefile.ref

This builds a debug version of SpiderMonkey. All build files are created in a subdirectory named depending on your system (for example,Linux_All_DBG.OBJ if you are on Linux). To install this build on your system, see SpiderMonkey installation instructions.

To build an optimized (non-debug) version of SpiderMonkey:

make BUILD_OPT=1 -f Makefile.ref

To build a thread-safe version of SpiderMonkey:

make JS_DIST=/full/path/to/directory/containing/nspr JS_THREADSAFE=1 -f Makefile.ref


 このページの貢献者: Calmery, chikoski
 最終更新者: Calmery,